How can I customise my Everton product?
Custom sizes for some glass products are available via Bunnings Special Order. For more information on custom glass, visit our guide via the DIY Hub.
Contact us for information on custom glass panels, if it's not listed on the relevant product page, it is most likely available through special order.
Where can I install my Everton pool fence?
Whether you wish to install your product on cement, concrete, limestone or a sandy area, it comes down to choosing the right system for your landscape.
How do I comply with Australian regulations when installing my Everton product?
How do I install my Everton product?
Installing an Everton product is simple when you plan out the job. Installation guides can be downloaded as a PDF from each specific product page. Product pages can be accessed from the main navigation of the Everton site.
The image above is taken from the product page of the Everton Semi Frameless 930mm Pool Fence. PDF's are accessible from the 'Downloads' tab. You can also search for products using our website search tool.
For additional steps or video guides to installing an Everton product, we have many handy resources in our DIY Hub. This section of the site contains installation guides and instructions for users.
The holes in my system’s gate do not line up to the latch holes
Can I drill a hole in my pool fencing glass?
No. Everton glass products are toughened glass and cannot be cut or drilled without causing the panel to shatter. If you require a different panel to the standard range, you will require a custom panel.
Can I use the mini posts for balustrading?
Mini posts cannot be used for balustrading as they have not been approved for this purpose.
How far away should the heat source be from my splashback?
When installing a splashback, 200mm is the recommendation from the centre of the hob of your stove top.
Do I have to have a fire retardant wall behind my splashback?
This is not necessary if the heat source is more than 200mm from the splashback.
Can I install my splashback over tiles?
Yes, you can install a splashback over existing tiles using splashback silicon or adhesive.
If I drill a hole in my tiles how do I prevent water penetrating the walls and flooring?
When drilling holes in your tiles for attaching mounting brackets it will break through the waterproof membrane. We recommend to drill the hole and fill it with silicone when fitting your plug or anchor. This creates a waterproof barrier after the bracket has been screwed in.
Can I peel off the vinyl backing of the mirror?
The vinyl backing exists as a safety precaution in case your Everton mirror breaks. The backing will hold the broken parts together, preventing dangerous shards coming loose. Removing the vinyl backing is not only unsafe it will also void your product warranty.
What sort of silicone/adhesive can I use on the back of my mirror?
The silicone should not have acidic or alkaline content as it will eat through the mirror causing corrosion. The silicone needs to be neutral. A good product to consider is the Everton Clear Mirror and Splashback Adhesive.
How do I register my warranty?
To register for your product warranty, fill out the registration form online.
Retain your product receipt as proof of purchase,
Where can I find Everton products?
What is the maximum size of Everton pool fence panels available for order?
Use the Everton pool fencing and balustrading calculator to view the maximum size you can order per product. Custom sizes for some glass products are available via Bunnings Special Order. For more information on custom glass, visit our guide via the DIY Hub.
To learn how to use the Everton price calculator, please refer to this article via our DIY hub.
Contact us for information on custom componentry, if it's not listed on the relevant product page, it is most likely available through special order.
What are the product specifications of Everton glass?
All product specifications can be found by visiting the relevant product page on the Everton site. Each product page contains product size, product features and installation manuals.
Product pages also include information on the length of warranty and component specifications.
Can toughened glass break?
Breakages typically occur as a result of damage or stress to the glass edge or surface, usually during handling or installation. Damage or stress can weaken the glass that could then manifest as a breakage at a later point in time.
In the unlikely event of a breakage, toughened glass is engineered and designed to break completely and into small fragments, which are less likely to cause injury. It does not break into sharp shards like standard window glass.
Everything you need to know about toughened glass can be found on this article via our DIY Hub.
Are Everton products legislation compliant?
Everton glass products meet the Australian Standard AS/NZS2208, they are classified as 'Grade A Toughened Safety Glass'.
When installed correctly, Everton’s range of balustrades comply with the strict requirements of the relevant Australian Standards listed below:
NCC 2011 – Building Code of Australia 2011, Class 1and Class 10 Buildings
AS1170.0:2002 – Structural design actions, Part 0: General principles
AS1170.1:2002 – Structural design actions, Part 0: Permanent imposed and other actions
AS1170.2:2002 – Structural design actions, Part 0: Wind actions
AS4055:2006 – Wind loads for housing
AS1288:2006 – Glass in buildings – Selection and installation
AS1664.1:1997 – Aluminium structures, Part 1: Limit state design
AS4100:1998 – Steel structures
When installed correctly, Everton’s range of pool fences comply with the strict requirements of the relevant Australian Standards listed below:
AS 1926.1-2012 Safety Barriers for Swimming Pool
AS 1288-2006 Glass in buildings selection and installation
AS 2208-2006 Safety glazing materials in buildings
What is the average price point of Everton pool fencing and balustrading products?
To get a price estimate of Everton products, refer to our pool fencing and balustrading calculator.
How can I maintain my Everton product?
How do I obtain a Compliance Certificate, PS1 or Form 15?
Send an email to firstname.lastname@example.org with your full name and address.
You must also include photos of the installation and a copy of your proof of purchase (receipt).
What do I do if my Everton product breaks?
Contact the store that you purchased the product from and let them know what has happened. Supply the store with a copy of your receipt and photos of the broken product. They can then assist you further.